Home > How To > How To Connect CD Drive To Lenovo M53 Thinkcentre?

How To Connect CD Drive To Lenovo M53 Thinkcentre?

To troubleshoot the drive, see the CD and DVD drive troubleshooting section. Check for bent or broken pins on the system board IDE/SATA controller and the CD/DVD-ROM. Phones All Desktops & All-In-Ones Laptops Monitors Servers Smartphones Tablets Workstations Log in Log in Create Account Shop Support Product Home Drivers & Software How-tos & Solutions Documentation System Diagnostics Warranty Problems with the CD/DVD-ROM in the operating system are likely the result of improper operating system configuration, not with the hardware. navigate here

If using 3rd party CD or DVD recording software, check with the software manufacturer to verify drive compatibility and that all other software requirements are met. However, after it had rebooted about 3 times it froze on the 'loading windows' screen. Removing the external hard disk drive adapter from the adapter bracket To remove the external hard disk drive from the adapter, lift the adapter retaining latch. Phones All Desktops & All-In-Ones Laptops Monitors Servers Smartphones Tablets Workstations Log in Log in Create Account Shop Support Product Home Drivers & Software How-tos & Solutions Documentation System Diagnostics Warranty try here

Installing the optical drive box Install the screw that secures the optical drive box on the VESA mount bracket. Refer to the ThinkCentre or ThinkStation Hardware Maintenance Manual for system part numbers for the ODD Retainer and ODD Bezel Kit..Contact Lenovo Service parts to order individual system parts. If the hard drive does not power up after swapping the power cables but the CD or DVD drive now powers up, the power cable is bad.

If the CD or DVD drive powers up after removing the extra adapters or devices, either there is a problem with the removed adapters or devices, or the power supply does Trying a different drive may also be helpful. Configuration. If the disc fails in another system, replace the failing disc.

Figure 2. Some brands of "R" or "RW" media may function differently than others with your drive. Phones All Desktops & All-In-Ones Laptops Monitors Servers Smartphones Tablets Workstations Log in Log in Create Account Shop Support Product Home Drivers & Software How-tos & Solutions Documentation System Diagnostics Warranty https://support.lenovo.com/us/en/documents/emon-3llr58 Related Articles How to run CD or DVD automatically – ThinkPad Need additional information, visit theWindows Support Center Search Phones All Desktops & All-In-Ones Laptops Monitors Servers Smartphones Tablets Workstations Was

Verify that the drive supports the media that you are trying to read. Remove the screw that secures the external optical drive box on the VESA mount bracket and then slide the external optical drive box to remove it from the VESA mount bracket. Note the current configuration settings so they can be restored when you are finished troubleshooting. Figure 6.

Mechanical failure. If none is found, the system will boot to the hard disk drive. If a bootable disc (a disc with an operating system) is not found, the system will look for an operating system in the diskette drive. Install the CD by pressing the CD near the center until all 3 positive lock-down devices on the drive spindle lock into place.

Remove, examine, and reseat the drive data cable and power connections to the CD/DVD-ROM drive and the system board Cables should be carefully pulled near the connector when disconnecting from the check over here Click the DVD drive icon and click the "Eject" button on the toolbar. 2. Try another drive in this computer. Removing the optical drive box Slide the release button on the optical drive box and then remove the external hard disk drive adapter from the optical drive box.

CD and DVD drive troubleshooting DVD movie playback troubleshooting CD and DVD recording troubleshooting CD and DVD troubleshooting CD-ROM, CD-R, CD-RW, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, Muliburner, and Multi-Recorder drives are Installing the screw that secure the external optical drive Align the screw holes in the external optical drive box with the two screws on the VESA mount bracket and then slide Remove the three screws that secure the optical drive. his comment is here Figure 4.

Figure 7. Verify that the DVD movie playback is shown on the primary display. It may be possible to incorrectly flip cable connectors with IDE, but should not have this issue with SATA.

Figure 7.

The read function does work correctly. Your feedback helps to improve this site. Model no. The DVD player software available for download is for upgrade purposes only and requires the original version to be installed on the system.

Note: A customized setup configuration (other than default settings) might exist on the computer you are servicing. The drive activity light should flash and the drawer should open. Related Links A way to open DVD drive without pressing the "Eject" button How to run CD or DVD automatically – ThinkPad Unable to play CD/DVD not recognized by Windows 7, weblink Figure 1.

Under Primary Startup sequence, set First Startup Device to CD/DVD-ROM. These connections can spread open and not make sufficient contact. Installing a new external hard disk drive into the adapter Position the adapter into the adapter bracket and then pivot the adapter downward until it snaps into position. Note: The external hard disk drive, external hybrid drive, and external solid-state drive are only available on some models.

Can you or someone help with that, too? These steps apply to internal drives. Remove the front bezel. Slide drive tray out fully.

If the discs used are known to be good but the drive still fails, go to step 4. Slide the external hard disk drive towards the retaining latch and then lift the external hard disk drive out of the adapter. Make sure all drive jumpers are properly configured, including hard drives. (Master, Master with slave, Slave, or Cable Select). To install or replace an optical drive, do the following: Turn off the computer and disconnect all power cords from electrical outlets.

Search Phones All Desktops & All-In-Ones Laptops Monitors Servers Smartphones Tablets Workstations Was this information helpful? Installing the external optical drive into the external optical drive box Install the screw that secures the external optical drive in the external optical drive box. General Discussion BIOS Flash Question Lenovo ThinkCentre M57 6072-AUFAll, I have a Lenovo ThinkCentre M57 6072-AUF running Windows 7 64 bit. Connect the IDE or SATA connector to the drive.

Write failure. Remove the screw that secures the optical drive box on the VESA mount bracket and then slide the optical drive box as shown to remove it from the VESA mount bracket. Click the Settings tab. Phones All Desktops & All-In-Ones Laptops Monitors Servers Smartphones Tablets Workstations Log in Log in Create Account Shop Support Product Home Drivers & Software How-tos & Solutions Documentation System Diagnostics Warranty